OIL & GAS SURFACE PRODUCTION OPERATIONS and FACILITY

OIL & GAS SURFACE PRODUCTION OPERATIONS and FACILITY

Banana Inn Hotel, BANDUNG | February 21-24, 2011| US$  1.190,-

Why Should You Attend?

This practical approach course is designed to provide a comprehensive understanding of Surface Production Facility, Process, Operation and Maintenance. It will be presented in order to fulfill the needs of All technical and non-technical (field and headquartered) personnel of Oil & Gas Company who involves in or concern with onshore or offshore Oil & Gas Surface Production Facility, Process, Operation and Maintenance.

Who Will You Meet?

All technical and non-technical (field and headquartered) personnel of Oil & Gas Company who involves in or concern with onshore or offshore Oil & Gas Surface Production Facility, Process, Operation and Maintenance.

What Will You Get After Completing This Course?
After completion, participants will understand why oil & gas must be processed in near well surface production facility, how the process is carried out, what equipment and components are needed, how each equipment works, and what are the goals to be achieved in each stage, in both technical and economical point of views. Participants will better classify requirements for each separation process and specification of vessels, columns, piping, valves, pump, compressor and related devices used in surface operations and improve knowledge on safety, inspection, maintenance and troubleshooting of the whole system.

What Will You Learn from This Course?

In this tailor made course participants will learn from and discuss with professional instructor the following subjects:

1. Surface Production Processing and Flow Diagram

• Tubing, wellhead and the pressure regulating devices
• Header, manifolds and slug catcher installation
• Oil processing scheme and crude to sales
• Gas processing scheme and export gas to sales
• Sand & produced water handling, treatment and dispos

2. Production Separators, Flowlines, Heater-Treater and Storage Tanks

• High, Medium and Low pressure production separators operations
• Flowlines, gathering lines, trunk lines and the safety control valves
• Crude dehydration and stabilization processes and operations
• Oil heater-treater (fired, chemical and electrostatic) and the safety control system
• Gun barrel / wash tank and degasser operations
• Storage tanks, crude pumps, crude measurement and BS&W monitoring
• Crude transportation through pipeline system

3. Gas Gathering & Compression

• Gas gathering and control of flow & pressure
• Gas conditioning prior to compression
• Natural gas liquid recovery and fractionation
• Gas compression and the compressor control system
• Gas measurement and composition monitoring
• Gas pipeline to sales and the safety control valves

4. Gas Processing and Sour Gas Treating

• Gas separation process and operations
• Heavy hydrocarbon removal to satisfy dew-point requirement
• Sour gas treatment and H2S & CO2 removal processes
• Amine sweetening plant Operations and Maintenance
• Gas dehydration process to satisfy water content requirement
• Glycol contactor Operations and Maintenance
• Hazards and safety in gas handling operations

5.    Gas Pipeline Problems and Troubleshooting

• Pipeline Leakage and short remaining service life
• Pipeline cracking due to material defects and imperfections
• Pipeline failure caused by internal corrosion and MIC
• Coating and wrapping damage due to external attack by soil and water
• Severe external corrosion due to failure of cathodic protection
• Gas transmission operation problems due to multiphase flow
• Pipeline plugging caused by scale and deposits
• Recommended practice for pipeline inspection and monitoring
• Recommended practice for pipeline cleaning and pigging

What will I learn from this training?

Dr. Ir. Sudjati Rachmat, DEA was graduated from Petroleum Engineering Department of ITB in 1979 and hold Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France. The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux. Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Fluid Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

Tuition Fee

Registration Until February 14, 2011

• US$   1190,-/participant
• US$  990,-/participant for 3 or more participants from 1 Company

cforms contact form by delicious:days