SURFACE PRODUCTION OPERATION & EQUIPMENT

SURFACE PRODUCTION OPERATION & EQUIPMENT
Hotel Golden Flower Bandung |25 – 29 July 2011 | Rp 7.950.000/person

OBJECTIVES :

After completion of this course, the participants will be able and capable to :

1. Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
2. Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE/PARTICIPANTS :
No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

TRAINING MATERIAL OUTLINE :

1. Gas Surface Production Operation and Equipments
   1. • Ideal gas
      • Real Gas
      • Gas Formation Volume Factor
      • Gas Compressibility
      • Gas-Water System
      • Gas-Condensate System
   1. • Reservoir Gas Flow
      • Gas Reserves
      • Well Completion Effect
      • Tight Gas Well
      • Gas Well Testing
   1. • Basic  Flow Equation
      • Flow in Wells and Flow in Pipelines
      • Effect of Liquids
      • Use of Pressure Traverse Curve
      • Liquid Removal from Gas Wells
   1. • Type of Compressors
      • Compressor Design
      • Centrifugal Compressor
   1. • Tubing and Flow Line Effect
      • Separator Pressure Effect
      • Compressor Selection
   1. • Orifice Metering
      • Metering System Design
      • Other Metering Methods
   1. • Well Testing and Sampling
      • Gas Cycling
   1. • Pressure Cumulative Production Plot
      • Hydrate Formation
      • Sour Gas Production
      • Corrosion Control With Inhibitors
      • Sulfur Deposition
   1. • Field treatment of Natural Gas
      • Gas Plant Operation
      • Gas Dehydration
      • Gas Sweetening
   • Introduction to Gas Handling and Facilities
   • Gas Properties
   • Gas Reservioir Performance
   • Gas Piping System
   • Gas Compression
   • Total System Analysis
   • Flow Measuring
   • Gas Condensate Reservoir
   • Field Operation Problems
   • Gas Processing
2. Oil Surface Production Operation and Equipments
   1. • Oil Well Equipment
      • Oil Well Production Operation
      • Well Automatic Safety Device
   1. • Oil Gath ring System
      • Manifold e System
      • ?Flowline Sizing and Design
   1. • Separator and Principle of Separation
      • Design of Separator
      • Oil Dehydration
   1. • Introduction to Measurement
      • Crude Oil Measurement
      • Gas Measurement
   1. • Introduction
      • Responsibility for Test
      • Preparation for Test
      • ?Types of Well Test
      • Equipment and Procedures
      • Accuracy of Fluid Measurement
      • Problem in Testing
      • Type of Test
   1. • Gas Lift
      • Submersible Pump
      • Succker Rod Pump
      • Hydraulic Pump
   • Oil Well Surface Production Equipment and Operation
   • Oil Gathering System. Manifold and Flowline
   • Crude Oil and Gas Separation
   • Principles of Measurement
   • Well Test
   • Artificial Lift Method
3. Cases study and discussion

INSTRUKTUR TRAINING

Dr.Ir. Sudjati Rachmat, DEA. and Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

VENUE :

Hotel Golden Flower Bandung

TRAINING DURATION :

5 days

TRAINING TIME :

1. 25 – 29 July 2011

INVESTATION PRICE/PERSON :
1.    Rp 7.950.000/person (full fare)  or
2.    Rp 7.750.000/person (early bird,1 week  payment before training) or
3.    Rp 7.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Training CD Contains Training Material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or Waistcoat or T-Shirt
6. Bag or Backpackers
7. Training Photo
8. Training Room with Full AC Facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified  instructor
11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

cforms contact form by delicious:days